ESD is generally divided into direct anti-static flooring tile, PVC anti-static flooring and anti-static floor.
1, Anti-static tiles in the tile firing process carried out by adding anti-static powder physical modification, it is very stable antistatic properties, resistance value of 10 ^ 6 to 10 power of 10 ohms, and the construction is convenient ordinary plasterers can shop. Increase in the floor laying aluminum foil or copper foil below to better enhance the conductivity.0.5%), easy to clean (can be used directly without dripping mop clean), acid and alkali resistance are the A-level, high level, the floor is national patent product (zL 03242644.5) as long as the Stones are not very strong load capacity of hollowing (floor load-bearing performance and the same), can be used for UPS room, on the alignment sites. Because of its good overall performance, it becomes more and more popular in the market.

2, PVC anti-static flooring sheet (typically 600 × 600mm) or the membrane directly paving, installation of speed (but requires professional installation work will be installed, otherwise there will be bagging blister), anti-static properties more stable, but easy to aging, almost a little dirt capacity. PVC anti-static floor construction process:

a, the base surface treatment;

b, self-leveling cement trowel scraping leveling;

c, brushing the bottom conductive adhesive;

d, the laying of copper foil;

e, paste PVC board;

f, open V-groove;

g , welding;

h, the surface clean.

3, Anti-static floor features: a, good antistatic effect lasting, not subject to time, temperature, humidity and other effects;

b, use solvent-free high quality epoxy hardener;

c, alkalis, moisture , mirror effect;

d, acid, alkali, salt, oil medium corrosion, alkali-resistant properties, especially good;

e, wear, pressure, impact resistance

4. Elastic anti-static floor construction process:

a. base Brushing sealer surface treatment

b  laying of copper wire,

c  cut the middle slot

d conductive paint scratch